York Floor Ceiling R-410A 50Hz Service Manual Page 349

  • Download
  • Add to my manuals
  • Print
  • Page
    / 385
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 348
Controller
___________________________________________________________________________________
- 348 -
3.5.4 Uniform setting page
Uniform setting is specific to all the indoor units within the system and includes mode setting,
locking, unlocking and mode locking and unlocking for indoor units.
a is the air conditioner setting column, where the remote controller locking setting is to send
the locking commands to all the indoor units so that they cannot receive remote controller
signals. The default is unlocking. On/Off option refers to sending commands to switch on or off
the air conditioner. In case of Off, the swing, mode, fan speed or temperature setting is
disabled. Such settings are enabled if On is selected. Swing function includes swing On /Off with
Off as the default. Mode option includes cooling, heating, fan, dehumidifying and auto. The fan
speed of indoor unit fan may be high, medium, low and auto. The temperature can be set within
1730°C. After “Send Command” is pressed, the system sends commands to each indoor unit
for setting.
b is the timing On/Off setting option. When either option is selected, On/Off option will be
shielded. If timing On is selected, press “Send Command” to save all the settings and switching
on information into the database. If timing Off is selected, press “Send Command” to save the
switching off information into the database. All the timing information of each indoor unit can be
displayed at the query system when the timing time is not up. When timing time is up, all the
setting information will be sent to the indoor units and the timing information will then be
Page view 348
1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 384 385

Comments to this Manuals

No comments