Controller
___________________________________________________________________________________
- 326 -
4.2 Requirement of network system
1) Hardware Requirement
Equipment specs Recommendation Remarks
PC
CPU:Pentium 4, 2G and above frequency Hard
disk:40G or more Memory:512M or more
Communication ports:Two or more R-232
ports, and three or more USP ports Operating
system:WIN2000 or WIN XP
Lenovo, DELL
products
Uninterrupted
Power
Supply(UPS)
Capacity:200~250W/20min Voltage:As per
the site requirements Control signal:Power
failure signal
APC SU700 series
Watt hour
meter(WHM)
Function:Dynamically change the address of
WHM as per the standard and display the
reading of WHM as per the dynamic address of
main board input
Zhengtai DTS634 Conform to DL/T
645-1997 standard
Softdog Yingdu
Others Shielded 2-core twisted-pair Conform to network
air conditioner
installation guide
2) Indoor and outdoor CCM
2.1 Indoor centralized controller
2.1.1 The functions of indoor centralized controller include transmission of status information of
indoor unit to the computer and of the control and query commands from the computer, and
meanwhile it can query for the status of indoor unit and send control commands.
2.1.2 Overview of indoor centralized controller
♦ An indoor centralized controller and 64 YDS indoor units of air conditioner form an air
conditioner LAN and thus centrally control all the air conditioners within the LAN, where various
control commands can be sent to the indoor units and status can be set up to satisfy various
control requirements. The control signal of centralized controller can be sent up to 1200m.
♦ A centralized controller enables interface with computer or gateway to realize centralized
computer control over and parameter setting and status query of all the air conditioners in the
network. Furthermore, it enables connection with WAN through the computer or gateway and
thus computerized remote control.
Comments to this Manuals