York Floor Ceiling R-410A 50Hz Service Manual Page 258

  • Download
  • Add to my manuals
  • Print
  • Page
    / 385
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 257
Installation
___________________________________________________________________________________
___________________________________________________________________________________
- 257 -
Don’t place the pipe on the ground directly or scratch with the ground.
Cut the pipe and remove burrs with the cut surface downward.
Be sure to place a cap when raining.
4.6.2 Welding
1) Be sure to weld horizontally or downward, not upward.
2) Pay attention to the installation direction and angle to prevent oil-return or oil-accumulation.
3) Its necessary to charge nitrogen when welding.
Be far away from fire and prepare fire extinguishers and water to prevent fire on field.
Be careful not to injure people.
Confirm the proper clearance between pipe and connector.
Check if the supporting structural members are strong enough.
The traverse distances between supporting structural members are as follows:
Diameter (mm) Below 20 25~40 50
Max. Distance (m) 1.0 1.5 2.9
Page view 257
1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 384 385

Comments to this Manuals

No comments