York Floor Ceiling R-410A 50Hz Service Manual Page 347

  • Download
  • Add to my manuals
  • Print
  • Page
    / 385
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 346
Controller
___________________________________________________________________________________
- 346 -
swing setting, mode setting, fan speed setting, temperature setting and timing setting.
- If “All air conditioners” under f is not ticked, the air conditioner setting box is to set up the air
conditioner selected from the air conditioner selection box d.
- If “All air conditioners” under f is ticked, the settings are valid for all the air conditioners under
the centralized controller selected in c.
- The centralized controller settings include two options: remote controller locking and
unlocking. The default is unlocking. When locking is selected, the selected air conditioner will
not receive remote controller setting signals after successful locking, but the upper level settings
are still valid. When the remote controller of air conditioner is locked, the remote controller can
be unlocked and then the indoor unit can receive remote controller signals.
- On/Off setting is used to set up the air conditioner switching On/Off. When timing on or off is
selected, On/Off setting is shielded and cannot be operated.
- Mode setting is used to set up the operation mode of air conditioner, including Cooling,
Heating, Auto, Dehumidifying and Fan. The fan speed options include high, low and auto. The
temperature setting can vary between 1730°C.
- Timing On/Off option, if not ticked and selected, the timing on/off time is not available. When
either option is selected, all the setting information cannot be sent to the indoor unit
immediately through “Send”. Instead, such information will be saved in the database as per the
selected timing on /off status. If timing on is selected only, all the setting information except air
conditioner On/Off will be saved, including set timing on time. When the set timing on time is
up, the setting information, including switching on will be sent to the indoor unit. If timing off is
selected, only the timing off is saved and switching off command will be sent upon the timing off
time.
Page view 346
1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 384 385

Comments to this Manuals

No comments