York 12 SEER H*RC036S User Manual download pdf

TECHNICAL GUIDE

SPLIT-SYSTEM

AIR CONDITIONERS

12 SEER

MODELS:

H*RC018 THRU 060

(1.5 THRU 5 NOMINAL TONS, 1 PH)

H*RC036S(25,46) THRU 060

(3 THRU 5 NOMINAL TONS, 3 PH)

Due to continuous product improvement, specifications

are subject to change without notice.

Visit us on the web at www.york.com for the most

up-to-date technical information.

Additional rating information can be found at

www.ariprimenet.org.

LISTED

CERTIFICATION APPLIES ONLY

WHEN THE COMPLETE

SYSTEM IS LISTED

WITH ARI.

ISO 9001

Certified Quality

Management System

036-21137-004 Rev. C (0505)

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 12 SEER Series condensing unit is the outdoor part of a

versatile system of air conditioning. It is designed to be cus-

tom-matched with one of UPG’s complete line of evaporator

sections, each designed to serve a specific function. Match-

ing Air Handlers are available for upflow, downflow or hori-

zontal applications to provide a complete system. Electric

Heaters are available if required. Add-On coils are available

for use with upflow, downflow or horizontal furnaces and air

handlers.

WARRANTY

Single Phase Units:

5-year limited parts warranty.

10-year limited compressor warranty.

Three Phase Units:

1-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

• QUALITY CONDENSER COILS - The coil is constructed

of enhanced copper tube and aluminum fins.

• COIL PROTECTION - Coils are protected from damage by

a polymer mesh applied between the coil face, and a PVC

coated steel coil guard.

• PROTECTED COMPRESSOR - The compressor is inter-

nally protected against high pressure and temperature.

This is accomplished by the simultaneous operation of

high pressure relief valve and a temperature sensor which

protects the compressor if undesirable operating condi-

tions occur. A liquid line filter-drier further protects the

compressor.

• DURABLE FINISH - The cabinet is made of pre-painted

steel. The pre-treated galvanized steel provides a better

paint to steel bond, which resists corrosion and rust creep.

Special primer formulas and matted textured champagne

finish insure less fading when exposed to sunlight.

• LOWER INSTALLED COST - Installation time and costs

are reduced by easy power and control wiring connec-

tions. Discharge line heat exchanger knockouts are pro-

vided, if required. Available in sweat connect models only.

The unit contains enough refrigerant for matching indoor

coils and 15 feet of interconnecting piping. The small base

dimension means less space is required on the ground or

roof.

• TOP DISCHARGE - The warm air from the top mounted

fan is blown up away from the structure and any landscap-

ing. This allows compact location on multi-unit applica-

tions.

• LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise up away from the living

area. The rigid top panel effectively isolates any motor

sound. Isolator mounted compressor and the rippled fins

of the condenser coil muffle the normal fan motor and

compressor operating sounds.

• LOW MAINTENANCE - Long life permanently lubricated

motor-bearings need no annual servicing.

• EASY SERVICE ACCESS - Fully exposed refrigerant con-

nections, a single panel covering the electrical controls

and the molex plug in the control box connecting the con-

denser fan, make for easy servicing of the unit.

• SECURED SERVICE VALVES - Secured re-usable ser-

vice valves are provided on both the liquid and vapor

sweat connections for ease of evacuating and charging.

• U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer-

tification program, which is based on ARI Standard 210/240.

1 2 3 4 5 6 ... 23 24

Summary of Contents

Page 1 - TECHNICAL GUIDE

TECHNICAL GUIDESPLIT-SYSTEM AIR CONDITIONERS12 SEERMODELS:H*RC018 THRU 060(1.5 THRU 5 NOMINAL TONS, 1 PH)H*RC036S(25,46) THRU 060(3 THRU 5 NOMINAL TON

Page 2 - 2 Unitary Products Group

036-21137-004 Rev. C (0505) 10 Unitary Products GroupCOOLING CAPACITY - With Variable Speed FurnacesUNIT MODELVARIABLE SPE

Page 3 - Unitary Products Group 3

036-21137-004 Rev. C (0505)Unitary Products Group 11H2RC048S06P1DUC20V/PV8C20****UH G1FA048S21 21 1610 46.5 34.9 – 12.10 11.15P1DUC20V/PV8C20****UH G2

Page 4 - 4 Unitary Products Group

036-21137-004 Rev. C (0505) 12 Unitary Products GroupAll dimensions are in inches. They are subject to change without noti

Page 5 - Unitary Products Group 5

036-21137-004 Rev. C (0505)Unitary Products Group 13TYPICAL INSTALLATION TYPICAL FIELD WIRING - 1 Phase ApplicationTYPICAL FIELD WIRING - 3 Phase Appl

Page 6 - 6 Unitary Products Group

036-21137-004 Rev. C (0505) 14 Unitary Products GroupMultipliers for determining the performance with other indoor section

Page 7 - Unitary Products Group 7

036-21137-004 Rev. C (0505)Unitary Products Group 15Multipliers for determining the performance with other indoor sections.NOTE: For dry bulb temperat

Page 8 - 8 Unitary Products Group

036-21137-004 Rev. C (0505) 16 Unitary Products GroupMultipliers for determining the performance with other indoor section

Page 9 - Unitary Products Group 9

036-21137-004 Rev. C (0505)Unitary Products Group 17Multipliers for determining the performance with other indoor sections.NOTE: For dry bulb temperat

Page 10 - 10 Unitary Products Group

036-21137-004 Rev. C (0505) 18 Unitary Products GroupMultipliers for determining the performance with other indoor section

Page 11 - Unitary Products Group 11

036-21137-004 Rev. C (0505)Unitary Products Group 19Multipliers for determining the performance with other indoor sections.NOTE: For dry bulb temperat

Page 12 - DIMENSIONS - 3 Phase

036-21137-004 Rev. C (0505) 2 Unitary Products GroupPhysical and Electrical Data - 1 PhaseMODEL H2RC018S06 H2RC024S06 H2RC

Page 13 - TYPICAL INSTALLATION

036-21137-004 Rev. C (0505) 20 Unitary Products GroupMultipliers for determining the performance with other indoor section

Page 14 - COOLING PERFORMANCE DATA

036-21137-004 Rev. C (0505)Unitary Products Group 21Multipliers for determining the performance with other indoor sections.NOTE: For dry bulb temperat

Page 15

036-21137-004 Rev. C (0505) 22 Unitary Products GroupMultipliers for determining the performance with other indoor section

Page 16

036-21137-004 Rev. C (0505)Unitary Products Group 23Multipliers for determining the performance with other indoor sections.NOTE: For dry bulb temperat

Page 17

Page 18

036-21137-004 Rev. C (0505)Unitary Products Group 3Additional R-22 Charge / Orifice Size for Various Matched Systems - 1 PhaseOutdoor Unit H2RC018S06

Page 19

036-21137-004 Rev. C (0505) 4 Unitary Products GroupPROCEDURES:1. Unit factory charge listed on the unit nameplate include

Page 20

036-21137-004 Rev. C (0505)Unitary Products Group 5PROCEDURES:1. Unit factory charge listed on the unit nameplate includes refrigerant for the condens

Page 21

036-21137-004 Rev. C (0505) 6 Unitary Products Group- = Not applicable.COOLING CAPACITY - With Air Handler CoilsUNIT MODEL

Page 22

036-21137-004 Rev. C (0505)Unitary Products Group 7COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and CoilsUNIT MODELFURNACE**COILMODEL

Page 23

036-21137-004 Rev. C (0505) 8 Unitary Products GroupH2RC036S061050135014 G1FA036S14 1200 33.6 23.4 11.50* 11.50 10.6017,21

Page 24 - MATCHING INDOOR COMPONENTS

036-21137-004 Rev. C (0505)Unitary Products Group 9*Requires 2FD Blower Time Delay unless a standard furnace is equipped with one.** Refer to Quick Se