York DPC-1 User Manual download pdf (Page 14)

- C-n: the thermostat is not in communication with the ma-

chine. The communication error Er 93 would not be displayed

on screen.

The active keys are:

- Allow changing the selected mode.

- Memorizes selected value, and goes back to the

user programming menu.

- Cancels changes made, and goes back to user pro-

gramming menu.

Selection of outdoor probe type

Submenu P5

The clock digits display P5, indicating program 5.

The temperature digits display EA and Ed, which mean:

- EA. The thermostat displays the value of the analogue out-

door probe installed on the YKlon board or on the econo-

miser board.

- Ed. The thermostat displays the value of the digital outdoor

probe connected to the thermostat communications termi-

nal. Both microswitches of the digital probe must be se-

lected in ON position. In this case, the maximum number of

digital remote probes will be three.

The active keys are:

- Allow changing the selected mode.

- Memorizes selected value, and goes back to the

user programming menu.

- Cancels changes made, and goes back to user pro-

gramming menu.

RS1

RS2

RS3

O/B

REAR OF

FRONT

PANEL

THERMOSTAT

BASE

"A"

123456

DETAIL "A"

MICRO-SWITCHES SW1

Micro-switches for configuration of the

thermostat

The SW1 micro-switches for configuration are inside the ther-

mostat, in the back of the front panel.

To open the thermostat correctly, please read the installation

instructions in this manual: Fastening the thermostat.

For standard thermostat operation, these pins are factory-set

to OFF. Nevertheless, these settings can be change in ac-

cordance to user needs. The functions of each one are as

follows.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

York DPC-1 User Manual Page 14

Comments to this Manuals

Related products and manuals for Thermostats York DPC-1