York YUHC 18-60 User Manual download pdf (Page 23)

CM Choi

Shipping Manager

The product complies with the harmonized European safety standards and harmonized EMC standards listed above.

We have internal production control system that ensures compliance between the manufacturer products and the technical documentation.

The product is CE mark.

We declare under our sold responsibility that the equipment follows the provisions of the Directives stated above.

Authorized Representative:

Type of Equipment

Brand Name

Type Designation

Application of Council

Directive (s)

The following harmonized standards have been applied:

Standard (s)

EN 60 335-1: 2002+A11

EN 60 335-2-40 : 2003

EN 50366 : 2003

EN 55 014-1/A2 : 2002

EN 55 104-2/A1 : 2001

EN 61000-3-2 : 2002

EN 61000-3-3 : 1995+A1

DECLARATION OF CONFORMITY

YORK International (Northern Asia) Ltd.

15/F., Tower II, World Trade Square, 123 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong

Telephone: (852) 2331 9286 Fax: (852) 2331 9840

Technical Service Division: Telephone: (852) 2331 9286 Fax: (852) 2304 0068

YORK

International Corporation

DECLARATION OF CONFORMITY

1. Isolate all sources of electrical supply to the unit including any control system supplies switched by the unit. Ensure that all points of electrical and

gas isolation are secured in the OFF position. The supply cables and gas pipework may then be disconnected and removed. For points of connection

refer to unit installation instructions.

2. Remove all refrigerant from each system of the unit into a suitable container using a refrigerant reclaim or recovery unit. This refrigerant may then be

reused, if appropriate, or returned to the manufacturer for disposal. Under No circumstances should refrigerant be vented to atmosphere. Where

appropriate, drain the refrigerant oil from each system into a suitable container and dispose of according to local laws and regulations governing

disposal of oily wastes.

3. Packaged unit can generally be removed in one piece after disconnection as above. Any ﬁxing down bolts should be removed and then unit lifted from

position using the points provided and equipment of adequate lifting capacity. Reference MUST be made to the unit installation instructions for unit

weight and correct methods of lifting. Note that any residual or spilt refrigerant oil should be mopped up and disposed of as described above.

4. After removal from position the unit parts may be disposed of according to local laws and regulations.

INSTALLATION, REMOVAL AND DISPOSAL

Read the Manual Risk of electric shock Unit is remotely controlled and

may start without warning

Air Conditioners

YORK

YUKC-YUJC 12/18/24/30/36/48/60FU

This product contains refrigerant under pressure, rotating parts, and electrical connections which may be a danger and cause injury!

All work must only be carried out by competent persons using suitable protective clothing and safety precautions.

EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and Machine Safety Directive: MSD 98/37/CE

J368-EN.indd 23 2/1/07 9:41:38 AM

1 2 ... 18 19 20 21 22 23

Comments to this Manuals

No comments

York YUHC 18-60 User Manual Page 23

Comments to this Manuals

Related products and manuals for Conditioners York YUHC 18-60