York DPC-1 Operations Instructions download pdf (Page 5)

Fig. 8

f) Off

Press the

MODE

button alternatively un-

til OFF appears on the screen. The unit

is turned off and the word OFF, the am-

bient temperature, the day of the week

and the time are displayed permanently

on the thermostat display (Fig. 8).

h) °C/°F scale

To change the temperature degree

scale, press the

buttons si-

multaneously.

2.- Fan

When the

button is pressed, the Ad-

just mode is entered for 5 seconds. The fan

symbol

is flashing. Pressing de

button, you adjust the fan speeds (

) and

the fan regulation: automatic (AUTO) or in

continuous operation (AUTO disappear).

When the fan is set automatic (AUTO), it

will operate automatically the fan in

acordance with the compressor or heating

sources. Example:

AUTO

Automatic high speed

- Fixed low speed

- You can configurate the thermostat with

only one speed (micro-switch nº 6 to ON)

3.- Day/night selection

By pressing the

button you can se-

lect different temperature settings for the day

and night periods (in each one of the oper-

ating modes).

Once the thermostat is installed, the

symbol is displayed, indicating that the tem-

perature settings selected is for the day

period (comfort). Pressing the

but-

ton displays the

symbol, indicating that

the temperature settings is for the night pe-

riod.

Whenever this button is pressed the tem-

perature settings are alternated, in both day

and night

periods.

4.- Unoccupied selection

Pressing the

button for over 1 sec-

ond selects the unoccupied temperature

setting. Pressing the

or button

selects the desired temperature. If the

MODE

button is pressed in AUTO mode, the cool

or heat set points in unoccupied mode are

displayed alternatively.

If while in the adjust mode the

PROG

but-

ton is pressed, the temperature setting is

replaced by number 0, indicating the number

of days the unoccupied mode should last.

The

and

buttons increase and

decrease the number of unoccupied days.

If left at 0, this mode is maintained indefi-

nitely; but if a number of days beyond 0 is

programmed, the icon flashes through-

out the unoccupied period, indicating its

temporary nature. Once the unoccupied

period has concluded, the thermostat will

switch over to the day period (confort), ex-

cept when the air conditioning mode is

AUTO PROG, in which case the occupa-

tion mode will be the mode indicated by the

time schedule profile.

To exit the unoccupied option, just press the

button.

5.- Reading outdoor temperature

Pressing the

button displays the out-

door temperature for 5 seconds.

6.- Ambient temperature remote sensor

option

The DPC-1 thermostat is designed to ac-

cept a remote sensor for controlling the

ambient temperature of a room other than

the one the DPC-1 thermostat is located in.

The remote sensor is to be connected to

the inner connecting strip of the thermostat,

terminals RS1-RS2.

7.- Graphic information

The display provides constant information

on: ambient temperature, operating mode,

day/night period and fan operation. To have

acces to information on the temperature set

points press, just once, one of the tempera-

ture setting buttons. This will give us, on

screen and for 5 seconds, the temperature

set point established for the operating mode

that is visible on screen at that moment.

Programming menu

If the

PROG

button is pressed in

Normal

Mode

, only the symbols of the different pa-

rameters that can be programmed are dis-

played on screen:

- Clock setting (day of the week, hours

and minutes).

Fan setting.

0h 2 4 6 8 10 12 14 16 18 20 22 24

Selection of schedule

profiles. A schedule profile accepts

only

Comfort and Economy (Day and

Night)

periods. If pin 2 of the micro-

switch is set to OFF, this option is

not displayed.

Select temperature setting for heat-

ing and cooling mode in

Comfort

(Day) period

Select temperature setting for heat-

ing or cooling mode in

Economy

(Night) Mode.

Select temperature setting for heat-

ing and cooling in

Unoccupied Mo-

The active or selectable option will flash.

The initial option is setting the clock.

The active buttons are:

Allow selecting the active option.

Allow changing the selection.

- Selects the active option.

- Exits the

Programming menu

switching the thermostat in

Normal

Mode.

The display will come back to Normal mode

if no button have been pushed during 30

seconds.

1- Clock setting

Allows setting the day of the week, hour and

minutes.

OFF

°C

DISPLAY WHEN THE UNIT

IS FULLY OFF

0h 2 4 6 8 10 12 14 16 18 20 22 24

g) Ventilation only

This operating mode is available in the

OFF mode by pressing the but-

ton, which selects the fan speed.

OFF

°C

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

York DPC-1 Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Thermostats York DPC-1